المحرر موضوع: ورسان الثانية دبي إصلاح غسالة  (زيارة 53 مرات)

0 الأعضاء و 1 ضيف يشاهدون هذا الموضوع.

غير متصل kmalramisamer

  • عضو مميز
  • ****
  • مشاركة: 1220
  • منتديات عنكاوا
    • مشاهدة الملف الشخصي
    Warsan Second Dubai Washing Machine Repair



    Washing Machine Repair - How To Fix Your Washing Machine DIY
     
    Washer troubleshooting and repair: Here are a few tips on what could be going wrong or why your washing machine is broken and how you can fix it. All of these troubleshooting methods can be applied to washing machines made by Whirlpool, Maytag, Samsung, LG, Kenmore, Bosch, GE, and more. See below for 6 easy repair methods for all washer troubleshooting water not filling, makes noises, not starting, leaking water, moving and vibrating, and detergent not going into washer.
    Warsan Second Dubai Washing Machine Repair




    Warsan First Dubai Washing Machine Repair
    Repair 1: Washing Machine Is Not Running - Not Starting
    If your washing machine refuses to start, it might not be properly connected to the power source.
    However, if it stops running in the middle of a cycle, the machines overload protector might have tripped.
    The easiest fix is to take out some of the load from the machine and run it again.


    [LIST=1]
    • Check the power   cord, the source of power and electrical supply, if your washing   machine refuses to start.
    • It is also possible   on some washer models with knobs, that the on and off knob   might not be working.
    • Remove power,   remove panel, and check wiring or burnt spots on main control   assembly/knob.
    • You can purchase a   new washing machine knob or main control assembly if this is your   issue.
    Repair 2: Washer Is Taking Too Long To Fill Up With Water
    The washtub of your washing machine should take only few minutes to completely fill up before starting the spin cycle.
    However sometimes you may notice that your washtub is just taking too long to fill up completely.
    Here's what might be happening and how to fix it:


    [LIST=1]
    • The valves that   control the amount of water filling the washtub might not be   completely open.
    • In this case, you   can simply physically check this valve and make sure that the lever   is completely turned on.
    • The hoses bringing   the water into the washtub might be blocked or clogged or the hoses   are damaged and need replaced.
    • In this case, you   need to straighten out any kinks in the hose pipe.
    • Switch off your   washing machine and remove the hose pipe from its attachment.
    • Physically   straighten out any kinks you might find.
    • If the hose pipe is   cracked or leaking, replace it with a new drain hose.
    • It is also possible   that the hose pipe is clogged with dirt and grime.
    • Clean out the hose   pipe well, removing all the clogging particles, and attach it back   to your washer.
    • Low water pressure   might also be a reason why your washtub is taking too long to fill   up.
    • Ensure that all   other water sources of your home are shut and try washing again.
    Repair 3: Washing Machine Is Making Grinding Noises
    More often than not, overloading your washing machine with more clothes than it can handle causes this common issue.
    This is a pretty standard fix.


    [LIST=1]
    • The drain pump on   your washing machine is responsible for draining out all the water   from the tub before the spin cycle begins.
    • However, if this   motor starts to make a grinding noise, it might indicate that the   drain pump is defective or has a restriction.
    • Remove the front   panel of your washing machine and verify that the source of the   noise is from the drain pump.
    • Remember that you   have exposed the open parts of the washing machine.
    • Be very cautious   while dealing with an open washing machine.
    • Remove the inlet   hose from the drain pump, keeping a container handy to catch any   excess water from the drain pump or hose.
    • Inspect the pump to   see if it is turning properly without any restriction.
    • Check to see if any   foreign objects are lodged in the pump.
    • Remove any foreign   objects or restrictions from the drain pump, or purchase a new   drain pump if required.
    Repair 4: Washing Machine Is Leaking Water
    Water leaking from washer machines is most commonly caused by hoses or connections that have broken, cracked or become loose.

    [LIST=1]
    • Make sure that the   water leak is not occurring from a backed up standpipe or a leaking   hose pipe, which drains the water from the water tub.
    • Check all the hoses   and connections carefully and look for any cracks, loose ends, or   breaks in these connections.
    • You could buy a   hose clamp or even completely replace the hose and buy a new one.
    • If you are   overusing detergent in your washing, it could be causing some   leakage.
    • To fix this, you   could opt for a low sudsing detergent or just put in less the next   time you do your laundry.
    • A loose tub seal or   gasket could also cause water leaks in your washing machine.
    • Replace the tub   seal of your washing machine to fix this.
    Repair 5: Washing Machine Is Abnormally Moving/Vibrating/Shaking:
    Washing machines usually come with a shock absorber that dampens the movement when it is running.
    However, a weakened or damaged shock absorber will cause unnecessary moving and shaking of your washing machine.
    If this is not corrected at the earliest, it could cause a lot more damage to your washing machine.


    [LIST=1]
    • The suspension and   tub springs are in charge of stabilizing the tub to the base.
    • These springs also   absorb the shock and reduce the movement of the washing machine   while it is spinning.
    • If these springs   become inelastic or damaged, it could be causing unnecessary   vibrations.
    • Replace the   suspension springs with new ones and your washing machine will work   as good as new.
    • Many models of   washers also have damper pads and snubber rings located at the   bottom of the machine.
    • With normal wear   and tear, these parts also loosen up, causing the washing machine to   shake uncontrollably.
    • An anti-vibration   damper pad and a new snubber ring is the perfect fix to this   problem.
    Za'abeel Second Dubai Washing Machine Repair